~70% less oil
on cuttings.

Hundreds of wells. Run the numbers.

Request a free field assessment See the results

~70%

less oil on cuttings, across over a thousand retort samples

360+

Canadian wells on record

15,400+ m³

of drilling fluid recovered

ROC varies with shaker configuration, lithology and fluid type. We measure it on your well.

Request a free field assessment →

How it works

1. Install after the shakers

A standalone, portable unit that runs separately from your active mud system.

2. Dry the cuttings

RecoverTank's vertical cuttings dryer spins oil-based mud off the cuttings. Across over a thousand retort samples on hundreds of wells, oil on cuttings dropped by about 70%.

ROC varies with shaker configuration, lithology and fluid type. We measure it on your well.

3. Polish & return

Recovered fluid is polished, metered and returned to your active system, ready to reuse.

4. Keep drilling

A bypass lets drilling continue while the unit is serviced or a component is bypassed.

On location

  • Rig-up in a few hours
  • Operated on site by Fuse technicians
  • End-of-well report
RecoverTank on location with the feed auger running in from the rig side
RecoverTank on location, feed auger running in from the rig side.
Inside a RecoverTank unit: vertical dryer and drive, 2024
Inside a RecoverTank unit, 2024.
Inside RecoverTank: vertical cuttings dryer, pumps and hydraulics
Inside the unit: vertical cuttings dryer, pumps and hydraulics.

Built by Fuse

Fuse designed and builds its own RecoverTank units.

When something needs changing, the people who built the unit are the ones who change it.

We run them on your rig with our own technicians.

Results

Where we've worked

Hundreds of wells across Western Canada and the USA.

RecoverTank spotted beside the rig on location
RecoverTank on location in Western Canada.
Map of Western Canada and North Dakota with orange dots marking general areas where RecoverTank has run
Dots show general areas only, not individual well locations. Basemap: Esri World Topo.

360+

Canadian wells on record

15,400+ m³

of drilling fluid recovered

Over 30%

fewer disposal truckloads — 32% average across 27 wells (4 operators, 2015–2019); up to 37% on full programs.

Results vary with operator stabilization practice, mix-off and weather.

See the results →

See what you're losing to the bin.

Proven on the toughest wells in Western Canada.

Tell us about your next program. At no cost, we'll estimate how much fluid you can recover and what it's worth.

Request a free field assessment

Give us a call · 403-451-0133

What we're building next

The same engineering behind our cuttings recovery is now being applied to new markets. Our hydro-vac slurry processing system separates water and solids from excavation slurry so both can be reused or disposed of more efficiently. It is in development. If you have a hydro-vac waste problem, talk to us.